Bartron Supply Inc.

  • 109 SR 92 South
  • Tunkhannock, PA 18657
  • Call Us: (570) 836-4011
  • https://www.bartronbobcat.com/
Print This Page

2024 John Deere 2 Series 2025R

Selling Price -

$21,115.00

Information

2024 John Deere 2 Series 2025R


- 120R LOADER Included


- CASH SALE ONLY



  • Standard LED headlights and fender lights

  • Hydro transmission with TwinTouch™ pedals for ease of use

  • AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes


Features may include:


Key features of the 2025R Tractor


ENGINE



  • Updated isolated Yanmar® TNV Clean & Silent Diesel Engine

  • Meets Tier 4-emission standards

  • Engine features lower levels of exhaust and emissions

  • Isolated engine for quieter operation

  • 24.2 gross hp - 18 PTO hp (5.8 percent increase in PTO hp over the 4110 Tractor)

  • As per 97/68/EC ISO @ rated speed.


POWERTRAIN



  • Standard HST transmission with Twin Touch™ foot pedals

  • Allows for increased performance

  • Larger tires


HYDRAULICS



  • Standard dual mid-selective control valve with integrated loader joystick

  • Two options for raising and lowering the mid-mount mower deck

  • Standard mechanical lift system—uses 3-point hitch to raise and lower mower deck


OPERATOR STATION AND CONTROLS



  • Ag tractor family styling

  • One-piece hood design

  • Updated instrument panel, dash, and throttle design

  • Molded foot deck

  • Standard folding rollover protective structure (ROPS)

  • Standard mid rockshaft with mower deck height adjustment


IMPLEMENTS



  • H130 Loaders

  • Commonality of loaders and rear implements between 2025R and 2032R

  • Updated drive-over deck with the stow-and-go feature


STANDARD EQUIPMENT FOR THE 2025R TRACTOR



  • Folding ROPS

  • Dual mid-selective control valve with integrated loader joystick control

  • Power steering

  • Four-wheel drive

  • Mid PTO

  • Wet-disk brakes

  • Cruise control


Yanmar is a U.S.-registered trademark of Yanmar Company Limited.


Yanmar® diesel engine


Power is provided by a durable and efficient high-torque 3-cylinder Yanmar TNV Series diesel engine.


This series of engines was developed to meet environmental requirements for Tier 4 (2025R) emission requirements by featuring lower levels of both exhaust and emissions.


As per 97/68/EC ISO at rated speed.


Yanmar TNV Series engine offers these:



  • Economical cast-in block cylinder design for good cooling and long life

  • Indirect fuel injection on the 2025R uses a pre-combustion chamber to give the engine a smooth and quiet operation

  • Direct fuel injection on the 2032R injects fuel on top of the pistons and allows for more efficient combustion and fuel economy

  • Aluminum alloy piston with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics

  • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and generating less noise from the piston slap

  • Higher top rings on the piston and a thinner head gasket greatly reduces the volume of unburned waste gases and increases combustion efficiency

  • Timing gear teeth have a roll-off profile giving almost no clash, no noise, and no backlash

  • Special flywheel flange seals flywheel air turbulence noise inside the flywheel housing

  • High-torque reserve provides plenty of power under heavy load yet retains excellent fuel economy

  • Fuel filter with replaceable element

Photos

Highlights

  • $28,096.00
  • $21,115.00
  • Tunkhannock
  • New
  • 52035
  • 2024
  • John Deere
  • 2 Series 2025R
  • Model: 3TNV80F-NCJT
  • Hydrostatic - two range
  • Diesel
  • Available

Specifications

  • 2024
  • John Deere
  • 2 Series
  • 2025R
  • Compact
  • Model: 3TNV80F-NCJT
  • SAE J1995 rated power: 23.9 hp (17.8 kW) / 3200 rpm at 24.2 PS
  • Yanmar®
  • 3200 rpm
  • Natural
  • Final Tier 4
  • 77 cu in. (1.267 L)
  • Three | Cast-in-block
  • 3.2 in (80 mm)
  • 3.3 in. (84 mm)
  • Pressurized
  • Water pump
  • Dual element
  • At rated speed: 39.1 lb-ft (53.1 Nm)
  • Power take-off (PTO) power: 17.2 hp (12.8 kW) | Rear - 540 rpm / Mid - 2100 rpm
  • Indirect injection
  • Diesel
  • 23.1:01
  • Indirect injection
  • Hydrostatic - two range
  • Spur gear
  • Power steering
  • Wet disk
  • Wet disk
  • R3 Turf: 23x8.50-12 / R3 Radial: 220/55-R12 / R4 Industrial: 23x8.50-12
  • R3 Turf: 12-16.5 / R3 Radial: 280/70 R16 / R4 Industrial: 12-16.5
  • 500 CCA
  • 40 amp
  • Starter size: 1.6 hp (1.2 kW)
  • Open center | Remote control valves available: Two
  • Steering: 3.5 gpm (13.4 L/min) / 3.5 gpm (13.25 L/min) | Implement: 3.5 gpm (13.4 L/min) / 3.5 gpm (13.25 L/min) / 7.0 gpm (26.5 L/min)
  • Gear
  • 1987 psi (137 bar)
  • Limited Category 1
  • 63 in. (1600 mm)
  • Without brakes: 8.2 ft (2.51 m)
  • 5.39 gal. (20.4 L)
  • 1349 lb (612 kg)
  • 2425 lb (1100 kg)
  • 24-in. behind link arms: 915 lb (415 kg)
  • Draft control sensing: Position control | Control: Independent | Platform - flat/straddle: Three-piece semi flat | Gear shift location - console/floor: Left-hand side
  • Open station: 1872 lb (849 kg) / Cab: 2392 lb ( 1085 kg)