2025 Exmark Lazer Z E-Series LRE801GKA604A3
Product OverviewAs the most affordable model in the Lazer Z line, the all-new 2025 Lazer Z E-Series delivers an unbeatable combination of cut quality, productivity, durability and value. Select from 48-, 52-, or 60-inch UltraCut Series 4 cutting decks, all equipped with a newly redesigned discharge chute that distributes clippings over a wider area. A choice of twin-cylinder Kawasaki, Kohler, or Vanguard twin-cylinder commercial engines are available, all equipped with heavy-duty external air filters. Power is delivered through unitized Hydro Gear pump and motor units for up to 11 mph forward ground speeds. A new full-suspension operator seat increases operator comfort during long work days.
Like our entire lineup of zero-turn mowers, the Lazer Z E-Series delivers unmatched durability and long-term value. Be sure to check out the rest of the Lazer Z family, including the Lazer Z S-Series zero-turn mower.
Features may include:
Unibody Frame- The Lazer Z E-Series utilize a one-piece unibody frame that delivers increased durability with fewer parts –– a classic case of “less is more”.
- Lazer Z E-Series models feature a single 9.5-gallon fuel tank with a single fill location.
- Built from formed and welded high-strength steel, UltraCut Series 4 full-floating decks feature maintenance free spindles with splined blade drivers to stop bolt tightening on impacts. The idler arm pivot bearings are also maintenance free.
- The deck and hydro belts can be installed and removed without tools.
- With just two annual grease points and maintenance-free sealed bearing spindles, the Lazer Z E-Series delivers maximum performance with minimum maintenance.
- 2025
- Exmark
- Lazer Z E-Series
- LRE801GKA604A3
- Zero-Turn Mower
- Model: FX730V | Series: V-Twin | Spec: FX801-AS31-R
- Kawasaki®
- Electric
- 852 cc
- 25.5 hp
- 3750 rpm
- Heavy-duty canister air filtration system
- Carbureted | Fuel Indicator: Mechanical float
- Gas Carbureted
- Engagement: MagStop electromagnetic 175 -ft-lb clutch
- Hydro-Drive | Drive Wheel Release: Allows unit movement without engine running.
- Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
- Dual Hydro-Gear ZT-4400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. | Speeds: Infinitely Variable
- Lever-actuated pawl brake.
- 13 x 6.5-6, smooth tread, pneumatic. Sealed Ball Bearings
- 24 x 12-12, 4 ply Super Turf TL
- 12V battery with 15 amp. alternator.
- Forward: 11.0 mph (16 kmph) | Reverse: 0–6.0 mph (9.7 kmph)
- Blade: Approximately 18,500 fpm.
- 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt, and 7-gauge reinforcement plate welded to spindle mounting locations for improved strength.
- Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- Casters Forks: .50" thick caster yoke arms.
- 72.7"
- Deck: 60"
- 84.6" | 3 blades at 20.50" length
- 70.1" | Cutting: 1.5" to 5.5" in 0.25" increments.
- Blade Cutter Housing: 7.75" | Blade Shaft: 98"
- 9.5-gallon single fuel tank with single fill location
- Curb: 1080 lbs.
- UPC: 193308242224
- Deluxe suspension seat, foam flip-up armrests, and integral safety switch. Adjustment: Fore and aft fom Operators Position.
- Caster Forks: Cast steel caster fork | Style: Floating Deck | Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
- 60
- $11,999.00
- Tunkhannock
- New
- 54530
- 2025
- Exmark
- Lazer Z E-Series LRE801GKA604A3
- Model: FX730V | Series: V-Twin | Spec: FX801-AS31-R
- Dual Hydro-Gear ZT-4400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. | Speeds: Infinitely Variable
- Gas Carbureted
- Available
- 72.7"
- 70.1" | Cutting: 1.5" to 5.5" in 0.25" increments.
- 60